Pure perceptual-based sequence learning.

Learning a sequence of target locations when the sequence is uncorrelated with a sequence of responses and target location is not the response dimension (pure perceptual-based sequence learning) was examined. Using probabilistic sequences of target locations, the author shows that such learning can be implicit, is unaffected by distance between target locations, and is mostly limited to first-order transition probabilities. Moreover, the mechanism underlying learning affords processing of information at anticipated target locations and appears to be attention based. Implications for hypotheses of implicit sequence learning are discussed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

高效环保型水基洗井液室内研究与性能评价

以渤海最大稠油油田SZ36-1油田的油污为研究对象,采用多种表面活性剂复配,研制了高效环保型水基洗井液;并对该洗井液的油污 清洗性能,与原油、地层水配伍性以及储层保护和环保等性能进行了系统地评价.结果表明 ,高效环保型水基洗井液对稠油油污具有良好的清洗能力;与0#柴油相比较,不仅洗井成 本低、时间短,而且还具有防腐作用和环保性能好等优点;同时,该洗井液还具有良好的配伍性和储层保护性能.     

数据库加密技术

介绍了信息数据安全中数据库加密技术的功能和特点、数据库加密算法，以及数据库加密系统的实现方式和体系结构。     

TATB基高聚物粘结炸药低温老化后的结构和热性能研究

将TATB基高聚物粘结炸药在0，－10，－20，－30，－40℃的条件下贮存120天，利用红外光谱测定其分子结构的特征，并 利用真空安定性试验、热失重以及差热分析测定低温贮存前后的热稳定性，结果表明：TATB基高聚物粘结炸药经低温贮存后分子结构没有发生改变，热稳定性较好，说明低温贮存对TATB基高聚物粘结炸药影响不大。     

基于"替换法"的汉字加、解密实现技术

文章讨论的基于“替换法”的汉字信息加、解密实现技术,改变了传统的汉字加密结果,使加密后的密文仍是可以识别和再利用的汉字,发送者可以在任何可编辑汉字的通讯设备上发送和接收密文,确保中文信息传输过程中的安全性。加、解密算法实现的代码语言为VFP6.0。     

铜基催化剂孔隙率对气体有效扩散系数的影响

研究了18种具有不同孔结构参数的粒状铜基甲醇合成催化剂孔隙率对有效扩散系数的影响。结果发现，催化剂微孔孔隙率增大，曲节因子亦增大，扩散阻力增加。将孔隙率与催化剂曲节因子关联，得到了半经验方程，用它可估算催化剂的曲节因子。     

电子商务中信息传输与共享

电子商务中信息传输与共享技术是电子商务的核心技术 ,电子商务是以Internet为基础的新兴产业 ,保护信息的安全无疑是十分重要的 ,人们越来越多地使用计算机网络来传送对安全敏感的信息 ,所以在信息传输域共享中 ,认证业务、保密业务、数据完整性业务、不可否认业务是当前电子商务急需解决的关键技术 ,本文对这方面做了一些探讨并提出自己的看法     

工艺空气压缩机组开车过程的思考

通过汽轮机组调速系统伺服马达不复位、主汽门不动作，反推出电磁阀控制线路接线错误，用人为短路压力开关等手段判断出组合油脱扣器活塞卡涩是造成现场延误开车的根本原因，提出完善大机组开车工作票制度、提高人员素质等措施。     

一个新的具有指定接收者(t,n)门限签名加密方案

提出了一个具有指定接收考验证的签名加密方案。该方案是数字签名与公钥密码体制的有机集成。与普通数字签名方案相比，除了具有认证性、数据完整性外还具有保密性和接收方的隐私性。然后又利用门限方案首次构造了一个（t,n)门限签名加密方案。该(t,n)门限签名方案具有数据传输安全、顽健性、通信代价更小、执行效率更高等特点。     

Detection of multiple cracks using frequency measurements

A method for detection of multiple open cracks in a slender Euler-Bernoulli beams is presented based on frequency measurements. The method is based on the approach given by Hu and Liang [J. Franklin Inst. 330 (5) (1993) 841], transverse vibration modelling through transfer matrix method and representation of a crack by rotational spring. The beam is virtually divided into a number of segments, which can be decided by the analyst, and each of them is considered to be associated with a damage parameter. The procedure gives a linear relationship explicitly between the changes in natural frequencies of the beam and the damage parameters. These parameters are determined from the knowledge of changes in the natural frequencies. After obtaining them, each is treated in turn to exactly pinpoint the crack location in the segment and determine its size. The forward, or natural frequency determination, problems are examined in the passing. The method is approximate, but it can handle segmented beams, any boundary conditions, intermediate spring or rigid supports, etc. It eliminates the need for any symbolic computation which is envisaged by Hu and Liang [J. Franklin Inst. 330 (5) (1993) 841] to obtain mode shapes of the corresponding uncracked beams. The proposed method gives a clear insight into the whole analysis. Case studies (numerical) are presented to demonstrate the method effectiveness for two simultaneous cracks of size 10% and more of section depth. The differences between the actual and predicted crack locations and sizes are less than 10% and 15% respectively. The numbers of segments into which the beam is virtually divided limits the maximum number of cracks that can be handled. The difference in the forward problem is less than 5%.